What Is an AMF Panel?

An AMF panel is a metal cabinet that connects the electrical system of your building—or generally speaking, a load—to an emergency generator in case of a power outage. The changeover switch is made using two contactors of a suitable size arranged in a special configuration: only one contactor must be active. In this way, there is no risk of backfeeding. Or in other words, the generator will never be connected to the mains and vice versa.
This principle is totally different from an ATS panel, which features a motorized switch changeover. To better understand the pros and cons of these technologies, visit the page:
The front door of the AMF panel features the AMF controller and various instruments depending on the final application: industrial, commercial, telecom, or military.
Read more about AMF Panel Full Form
Looking for the Right AMF Controller Solution?
Every reliable AMF panel requires a dependable controller at its core. Drawing on decades of field-proven hardware design, our solutions—such as the Be142 AMF Controller—deliver robust, microprocessor-based automation for industrial, commercial, and standby generator sets.
Explore our complete technical specifications and direct ordering options on our dedicated AMF Controller Product Pages.
AMF Panel Full Form
AMF Panel Full Form: the essential gateway that, via a contactor-based changeover, protects your load and control the generator in case of a power outage.
Bernini Design provides this technical guide to eliminate the widespread confusion regarding AMF panels, ATS units, and generator controllers.
AMF Panel Full Form Price List
AMF Panel: Access Premium Engineering Directly
Bernini Design Srl is committed to delivering high-performance power management technology worldwide.

This platform allows you to purchase AMF panels directly from the manufacturer, tailored to your specific power requirements. With over 40 years of industry experience, we prioritize end-user satisfaction above all else.
AMF Panel Full Form Typical Connection
We recommend that you insert suitable circuit breakers to limit the current through the panel. This will prevent severe damages to your wires in case of a direct short-circuit. Amf panles up to 100 A features terminal blocks.

AMF Full Form Tutorial
How does a contactor-based changeover work?
How to get the most from an AMF Panel?
Why install an AMF panel?
An AMF panel is a backup standby system for electrical gateway equipment, responsible for routing utility or generator power to your building according to your requirements.
An AMF control panel relies on a contactor-changeover solution, which is fundamentally different from a motorized changeover switch.
Enlarge to full size: 10 kW Single-Phase AMF Panel

By installing an AMF panel, you achieve a much higher level of load protection granularity—a critical advantage in telecom, data center, and medical applications.
The mechanism operates entirely on logic: the contactors open and close directly according to the AMF controller commands. In contrast, a motorized changeover can sometimes remain in a closed position even after the controller issues an open command, simply because motorized switches require AC power to operate. If utility power returns (even with out-of-limit voltage fluctuations), a motorized switch can expose your load to dangerous voltage spikes because the motor takes at least 500 ms to open.
This issue does not exist with a contactor-based AMF panel. The contactor remains safely open by default and will only close after the AMF controller fully validates the incoming voltage.
Learn more about the differences between AMF and ATS panels on the following page:
When to install an AMF panel?
An AMF panel is a backup standby system for "GATEWAY" electrical equipment. It is committed to connecting the generator or utility power to your building according to your needs. Install an AMF panel with a power generator of up to 60kVA. An AMF panel. If paired with a high-tech AMF controller, offers extraordinary benefits for load protection. It overcomes all typical "gaps" of the ATS panel. The most common underestimate issue is about the motorized transfer switch: in some cases it stucks in a closed position until a suitable source of power is capable of moving the motor. In other words, install an AMF panel when you load is critical: hospitals, telecom shelters, data centers and security systems. AMF panels over 50kVA are expensive. When it comes to high current, over 200 amps, is preferable to install a basic ATS panel paired with an AMF panel capable of serving the only critical loads.
AMF Panel Features Remote Control Monitoring
This is an example of 40kVA AMF panel that features full remote GSM monitoring. Using your mobile phone, you can directly control the assignement of the load to Mains or Generator.

You will receive 100% feedback of each operation. The BeK3 features an RS485 ports that support the Modbus Protocol up to 1000m. You can connect an RS-485-USB converter of RS-485-TCP/IP server.
Is an AMF panel different from an ATS panel?
There are differences in the controller point of view and power rating as well. Install an ATS panel when you require power above 60kVA. An AMF panel is based on contactor changeover technology.
Find out more about AMF wiring diagram with contactors (4,90€)

This will enable you to control the load and monitor the mains correctly. The drawback is the continuous power requirements of about 20W to hold the contactor in a closed position. But it is largely compensated by the benefit you get in a long-term.
Contactors offer tremendous flexibility in operation. The MOTORIZED SWITCH has a longer response time compared with a CONTACOR-BASED version. When power is absent, the CONTACTOR version will isolate the LOAD. An MOTORIZED SWITCH-based AMF panel can maintain continuity on the LOAD. This could be a source of problems.
AMF Panel Full Form Price List
A Rational AMF Configuration
This a typical 40kVA AMF panel made by Bernini Design SRL
[1] Emergency stop button [2] Mains and generator measurement connections [3] CANBUS and MODBUS [4] Fuses [5] Output relays [6] Battery charger [7] Circuit breakers [8] Mains Contactor [9] Generator Contactor with mechanical interlock [10] Terminal Blocks. [11] Current transformers [12] Input-output terminal block.
Why to purchase a Bernini Design AMF panel?
Bernini Design SRL manufactured the first compact AMF controller in 1988. In terms of AMF technology, it has been a turning point. Hundreds of businesses have attempted to imitate our technology ever since. With more than 600.000 systems in use globally, Bernini Design SRL technology is the industry leader in AMF panels used in critical applications.
A Bernini Design AMF panel feature a "unique" universal engine interface. This means that it does not matter what kind of engine is installed in your diesel generator. The electrician will easily install the panel on-site.

You can tell your electrician to open the wiring diagram tutorial page. They will instantly understand what it's about.
The long-term reliability
AMF AFTER 12 YEARS OF SERVICE DAY AND NIGHT ON THE SEASIDE
Believe it or not, after 12 years of continuous service day and night on A BEACH RESORT, the 40kVA AMF panel is perfectly functional. The customer contacted us to replace the metal cabinet!
![]()
Thanks to the silicon gasket, which features an IP65 rating, the internal parts of the panel are unaffected by the elements.
There is no evidence of rust on the inside.
THE PANEL AFTER 12 YEARS OF SALINE ENVIRONMENT EXPOSURE

To avoid this problem, a fibre-glass enclosure should be used when a panel works in saline marine environments. Regular maintenance with special coating must be periodically carried out.
THE PANEL AFTER 12 YEARS OF SALINE ENVIRONMENT EXPOSURE

What are the AMF panels' typical ratings?
From a minimum of 15 KVA up to 60 KVA, three-phase with or without neutral connection. When purchasing an Automatic Mains Failure panel, consider a safety margin of 20% by choosing one that has the biggest power: utility power or generator. AMF panels for single-phase operation are also available on request. The typical operation is in telecom shelters in remote locations.
Electrical specifications example for the 60kVA-400V AMF panel
| Description | Notes |
| Manufacturer - Production Date | Bernini Desing SRL -............ |
| Model-AMF (Serial No.) | 60 kVA - BeK3 (Nr. serie......) |
| Structure / Protection | Steel 1,5mm IP62 |
| External Dimensions | 700 X500 X260 / 32kg |
| Maximum Rated Power | 78 kVA @ 35°C |
| Continuous Rated Power | 60 kVA @ 35°C |
| Rated Voltage | 400 V / 360-440 V |
| Insulation Voltage | 1000 V |
| Rated Current AC1 | 115 A |
| Continuous Current / Short Circuit | 0-86 A @ 400 V /50 kA |
| Frequency / Range | 50 Hz / 45-55 Hz |
| Electrical Protections | Min-Max V-Hz, Max Amp |
| Changeover | 2 X contactor BF80T4A |
| Norms / Standards | IEC 61439-1-2-34-5-6-7 IEC 60529 |
| Internal Protections | 2 x Circuit Breakers 10 A 4-pole |
| Humidity Class | 5-85 % |
| Operating Temperatures | -5 °C/+35 °C Nominal (50°C max.) |
| Temperature-Dependent Power Reduction | Reduce the power by 5% for each degree °C above 35 °C. |
| Connections | 12X35 mmq terminal block |
| Battery Charger | 12 V / 2 A |
| Standby Power Supply | 20 VA |
1) The panel must be installed only by qualified personnel.
2) Electrical protection devices must be installed to limit the power and current flowing through the panel, from the mains or generator, to a maximum of 115 amps at 400 volts.
3) Neutral and ground connections are mandatory.
4) The negative battery terminal must be grounded on the engine side.
5) Do not open the door when mains or generator voltage is present. The panel's interior contains components that present a risk of direct contact (IP00).
6) Consider placing advice about the presence of a standby generator
AMF Panels International Standards Compliance
The Bernini Design AMF panels comply with multiple standards. First of all, the AMF panel is electrical equipment featuring several kinds of hazards. It complies with IEC61439, UL508, IEC60364, IEC62305, IEC61643, and 61557. You can find more details on the official IEC site:
On the other hand, the AMF panels deal with engines and generators. You should take important advice from ISO8528. From the automation point of view, the AMF panel is a key part of a standby system. In other words, it must comply with NFPA110, NFPA99 and c/CSA-M89. You can get more info by visiting this site
Not to mention that particular regulations might be in force in the country where the AMF panel installation is made.
AMF Panel Features Overview
5-Output with 80 settings
6-Input with 25 settings
200-Event log with RTC
Up to 600 Vac 3-Phase monitoring
Up to 1.000 Aac 3-Phase monitoring
Earth-Fault monitoring
Reverse Power protection
Over 100 adjustable
User-friendly control panel
User-friendly LCD navigation
Engine & Generator Instruments
CAanbus J1938 Modbus-RTU
How does a Bernini Design AMF panel increase the long-term reliability of your power generator?
First, we do not use standard AMF controllers DSE, Comap, Datakom or others. We are not limited by generator manufacturers' economic boundaries. We use the components we need, no matter what. Our job is focsed on an end-user satisfaction.
Our AMF controller is not made of plastic: it is not a "toy"

Second: you must follow our advice for a state-of-the-art installation.
All, and always, is about money. To save money, you install the controller on the generator. This is a bad idea.
Of course, it is a good idea for people who do business with the service. However, our goal is different. We believe it is a serious solution. We believe that the final customer deserves safety.

In the schematic above, the overvoltages can easily damage the generator. No matter the insulation you can reasonably provide. The stray capacitance of the connection will win. Yes, you can find cheap AMF panels. But this is not a professional solution at all. The following picture presents one of the optimal solutions.

In the drawing, you can observe that the AMF panel prevents overvoltages from reaching the generator. The controller can start the engine via an auto-start module installed on the generator [1] or the configurable input-output line [2]. Both solutions are more than acceptable.
AMF Panel Price
The price of a 25 kVA AMF panel is 878 € free shipping to EU. It features a conctactor-based changeover and Modbus remote control monitoring. Add the GSM option or the TCP/ip option to expand beyond limits the monitoring capabilities. European manufacturing with genuine european electrical parts. We offer 34-7-365 support and 5-year warranty.
Why to buy a Bernini Design AMF panel?
Bernini Design SRL manufactured the first compact AMF controller in 1988. In terms of AMF technology, it has been a turning point. Hundreds of businesses have attempted to imitate our technology ever since. With more than 600.000 systems in use globally, Bernini Design SRL technology is the industry leader in AMF panels used in critical applications. A Bernini Design AMF panel feature a "unique" universal engine interface. This means that it does not matter what kind of engine is installed in your diesel generator. The electrician will easily install the panel on-site.

AMF Panel Price Breakdown by Type and Capacity
These BeK3-based AMF panels are equipped with Modbus and CANbus protocols. Optional modules can be added for GSM and/or Modbus remote control and monitoring.
A 5%-10%-15%-25% discount is applied based on the quantity purchased with free shipping within Europe.
Benefit from our direct sales channel, extended warranty, and our unwavering commitment to technical support "bernini@bernini-design.com" / +40 721 241 361
| Nominal Power | Price | Size cm | wt. |
| 25 kVA
/ 45 A |
978
EUR |
60
40 25 |
16
kg |
| 40 kVA
/ 63 A |
1180
EUR |
60
40 25 |
22
kg |
| 60 kVA
/ 63 A |
1400
EUR |
70
50 25 |
22
kg |
The AMF panels are equipped with AC1 class contactors matching the nominal power. A mechanical and electrical interlocks prevent any possibility of backfeeding. The BeK3 controller is user-friendly and provides the basic functions required by a backup generator. The result is an economical and maintenance-frree product. The internal universal interfcae relay board can connect old technonoly generator or brand new generators.
GSM Generator Monitoring
If your backup generator plays a vital role in your electrical system, we recommend installing our GSM remote monitoring kit. To get optimal results we recommend thta you order the GSM kit together with the AMF panel. You will gat a turnkey product.

With our GSM kit, you can fully control your system via SMS, a simple and intuitive procedure. You can clear alarms, restart the generator, and manage load transfer. The kit is available only if the panel is equipped with the BeK3 controller..
Purchase Gsm Monitoring Kit
Price: 349 €
You can pay online or request a pro forma invoice.
bernini@bernini-design.com
WA +40 721 241 361
[Buy GSM Optional Kit-Bernini Design]
TCP/ip Generator Monitoring Kit
If you are comfortable with routers and internet techonolgy, you can purchase the TCP/IP kit.
Purchase TCP/ip Monitoring Kit
Price: 329 €
You can pay online or request a pro forma invoice.
[Buy TCP/ip Optional Kit-Bernini Design]
bernini@bernini-design.com
WA +40 721 241 361
Bernini Design Srl
Industrial Area, 46035 Ostiglia
Italy
+39 335 70 77 148
bernini@bernini-design.com
AMF Panel Wiring Diagram PDF
Technically speaking, the true nature of an AMF (Automatic Mains Failure) panel is a contactor-based changeover driven by two voltage monitoring relays.
An ATS panel shares the same final purpose: to supply continuous electric power to your building. However, its original concept relied on a physical, motor-driven changeover switch rather than contactors. Furthermore, in recent years, drawing a hard line between AMF and ATS controllers has become obsolete. Defining an ATS controller merely as a module with a single output to start a generator no longer makes sense in modern engineering. As a pioneer in digital AMF controllers since 1984, Bernini Design provides this comprehensive collection of AMF Panel Wiring Diagrams in PDF format to support professional installations and retrofits.
What is Inside the PDF Collection?
-Single-phase and three-phase AMF wiring layouts.
-Dual voltage relay monitoring schematics.
-Contactor-based changeover interlock wiring.
-Generator start/stop auxiliary circuit integration.
-Key Technical Differences (Contactor vs. Motorized Switch):
- A brief note expanding on why contactors require precise electrical/mechanical interlocks.
Understanding the main misconceptions about ATS and AMF.
The AMF panel must transfer the load to the GENERATOR or MAINS smoothly and with short downtime. The AMF panel wiring diagram illustrates the panel's internal connections. The controller monitors the parameters of the MAINS and automatically starts the engine via relays. Once the GENERATOR provides the correct frequency and voltage, the AMF panel connects the LOAD to the GENERATOR. The AMF panel features circuit breakers to protect the auxiliary interbal circuit wires from direct short circuits. The CONTACTORS feature a mechanical and electrical interlock. In other words. only one contactor can be activated.
Find Out More: click the image to buy the AMF Panel Diagram Tutorial (4,90 €)

The AMF panel inhibits the simultaneous activation of the contactors. To protect the systems from all kinds of overloading, you must set up the AMF controller. The AMF panel also interfaces with J1939-compliant engine.. It interfaces with a standard (or Non-Electronic) engine through normal DC relays. Flywell diodes are not required beacuse the interface board has internal suppression devices. When making the engine interface hardware, install suitable pilot relays on the engine's structure. Additional relays can be used for user-defined particular functions.
You may find additional information on this link
Bernini Design Srl
Industrial Area, 46035 Ostiglia
Italy
+39 335 70 77 148
bernini@bernini-design.com
