Solar Automatic Transfer Switch
The ATS CONECT solar automatic transfer switch is designed for solar systems. It also features a true manual bypass switch. This ATS panel is designed for small private power systems with up to 6kW of continuous power. It works with or without storage batteries. The most common installation is directly before the supply point of your house. In case of no power or mains failure, the ATS panel will instruct the generator to start. Once the batteries are full or when the mains is restored, the ATS panels will shut down the engine after a programmable cooling down time.
SOLAR AUTOMATIC TRANSFER SWITCH
How does a solar transfer switch work?
It features a 3-position switch: BYPASS, OFF, and ATS. The switch directly connects your house to the utility power in the BYPASS position. The ATS PANEL is therefore totally excluded. The red light will also turn on to indicate that the panel is not in ATS mode. The switch in the off position isolates your house from the utility power and the generator. This mode can be used to reset alarms. If you want to prioritize the solar system, you must connect its output to the utility power input of the panel. You will then connect the utility power to the generator input. The panel will normally connect your solar system to your house. If the solar system has no energy, the ATS panel chooses the secondary source connected to the generator ATS input.
Purchase the
CONECT ATS PANEL
349€
10-Year Warranty
DELIVERY TIME 10 DAYS AFTER PAYMENT CONFIRMATION
FREE SHIPPING IN THE EU
12KW Solar Automatic Transfer Switch Panel
899€
10-Year Warranty
DELIVERY TIME 10 DAYS AFTER PAYMENT CONFIRMATION
FREE SHIPPING IN THE EU
Zona Industriale
46035 Ostiglia
Italy
VAT IT01453040204
bernini@bernini-design.com
+39 335 7077148